(XRAY TRANSFORMER HV CONNECTOR USE 1/4" ENDMILL)

F5

M00 (RAISE BIT)

M00 (MILL FEED THROUGH HOLES)

G00 X-0.75 Y2.0
M00 (DRILL WITH 7/16")
M00 (TAP WITH 1/2" NPT)

G00 X-0.75 Y0.75
M00 (DRILL WITH 7/16")
M00 (TAP WITH 1/2" NPT)


M00 (MILL ORING GROOVS)
M00 (SWITCH TO 1/8" BIT)

G00 X-1.5 Y2.4375
M00 (DROP BIT TO Z-0.0625)
G02 I0 J-0.4375 X-1.5 Y2.4375 (cw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
M00 (RAISE BIT)

G00 X-1.5 Y1.1875
M00 (DROP BIT TO Z-0.0625)
G02 I0 J-0.4375 X-1.5 Y1.1875 (cw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
M00 (RAISE BIT)


M00 (SWITCH TO 1/4" BIT)
M00 (CUTOUT PANEL)
G00 X-1.5 Y0.75
M00 (DROP BIT)
G03 I0.75 J0 X0 Y0.75 (ccw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
G01 X0 Y2
G03 I-0.75 J0 X-1.5 Y2 (ccw circle G02 I<rel-center> J<rel-center> X<dest> Y<dest>)
G01 X-1.5 Y0.75
M00 (RAISE BIT)

M00 (DONE)